| List of Spare Parts |
| Part No. |
Part Name |
| 7M0326 |
CONNECTOR |
| 9H3757 |
WASHER 2.36 mm(.093 in.) thick |
| 1S7446 |
SCREW-MACHINE (8-32X0.437-THD) |
| 8C9660 |
WASHER (4.6X7.9X0.8-MM THK) |
| 9S2544 |
SCREW-HEX HEAD (8-32X11.13-MM) |
| 7M0327 |
WASHER-THRUST (17.40X25.4X1.6-MM THK) |
| 3T3418 |
FRAME AS (END) |
| 3T3423 |
WICK STARTER MOTOR ASSY |
| 3T3424 |
PLUG,PIPE STARTER MOTOR ASSY |
| 9G4101 |
BUSHING (END) |
| 3T9525 |
BRUSH PLATE ASSEMBLY |
| 6T0371 |
INSULATOR |
| 5P6298 |
SCREW (MACHINE) (10-32X0.5IN) |
| 9F5599 |
LOCKWASHER |
| 7F3525 |
WASHER-BUSHING (0.207X0.39X0.09-IN THK) |
| 6T0372 |
PLATE |
| 3T4709 |
PLATE |
| 2L6679 |
PLATE-INSULATING |
| 3T4710 |
PLATE |
| 6T0363 |
HOLDER AS-BRUSH (STARTING MOTOR) |
|
(EACH INCLUDES) |
| 3T9494 |
SPRING (STARTING MOTOR BRUSH) |
| 1T0808 |
WASHER (0.516X0.812X0.09-IN THK) |
| 3T3422 |
LEAD,ELECTRICAL STARTER MOTOR ASSY |
| 2J8163 |
PACKING,PREFORMED STARTER MOTOR ASSY |
| 7X3373 |
BOLT (5/16-18 X.88 IN) |
| 3T3434 |
PLUG (12.7MM OD SPHERE) |
| 5J5314 |
BOLT-SOCKET HD (5/16UNC X 1 1/2) |
| 3L3380 |
BUSHING,STARTER MOT ASSY |
| 0369821 |
SHIM LEVER HOUSING |
| 4M1828 |
WASHER,RECESSED LEVER HOUSING |
| 3063998 |
BOOT-RUBBER |
| 9M7609 |
SPRING,HELICAL,COMP SHIFT LEVER ASSY |
| 4M1827 |
RETAINER,SPRING LEVER HOUSING |
| 8C3089 |
SEAL (REAR PUMP TO CENTER PUMP) |
| 4M1853 |
LEVER,REMOTE CONTRO STARTER MOTOR |
| 5M3034 |
NUT,SELF-LOCKING,HE STARTER MOTOR |
| 7L2894 |
GASKET |
| 4M1831 |
PLUG,MACHINE THREAD STARTER MOTOR ASSY |
| 4M1854 |
PIN,GROOVED,HEADLES LEVER ASSY |
| 1H1023 |
PACKING,PREFORMED PART OF KIT P/N 5R1425 |
| 2D6392 |
GASKET SHAFT PART OF KIT P/N 5R1425 |
| 7T3974 |
HOUSING AS. (DRIVE) |
| 6N3826 |
DRIVE AS-MOTOR (4800321) |
| 2H3429 |
RING - RETAINING EXTERNAL |
| 6V1322 |
BOLT-PLT (1/4UNC X 3/8) |
| 8T4205 |
WASHER, FLAT-THIN(1/4) w/o Freespool Qty is 12 |
| 6N3279 |
INSULATOR,DISK |
| 0S1597 |
CAPSCREW (1/4 - 28 NF X 1 GD8, HEX) |
| 1M9971 |
SPACER (0.835X1.72X0.188-IN THK) |
| 1H2629 |
PLATE,INSULATION STARTER MOTOR ASSY |
| 7M0324 |
WINDING,MOTOR FIELD |
| 3R8797 |
SCREW & WASHER AS (3/8-24X0.72-IN) |
| 7F3488 |
POLE SHOE,STARTER |
| 7M8651 |
ARMATURE ASSEMBLY |
| 7M0325 |
INSULATOR,PLATE FIELD COIL |
| 3T9524 |
BRUSH AS (STARTING MOTOR) |
| 3N3763 |
KIT (TERMINAL) (STARTING MOTOR) (INCLUDES INSULATOR, BUSHINGS & WASHER) |
|
(INCLUDES BUSHINGS & WASHERS) |
| 1256537 |
INSULATOR |
| 3R8801 |
CLAMP (BOOT) |
| 8F1434 |
LOCKWASHER (EXTERNAL TEETH) |
| 6V8188 |
NUT-FULL (1/2-13 THD) (1/2-13-THD)(FULL) |
| 7X0562 |
WASHER-HARD (13.5X19X0.8-MM THK) |
| 4B2049 |
NUT-VALVE TO BRACKET 3.18MM(.125IN)THK |
| 8T0328 |
WASHER (HARD) (5.5X10X1mm THK) |
| 3E7771 |
HOUSING AS (STARTING MOTOR) |
| 1M9968 |
BUSHING(Parts of Housing Assem.4S7899) |
| 2F6678 |
SEAL,STARTER ARMATURE PART OF KIT P/N 5R1425 |
| 4L2729 |
WASHER (0.844X1.9X0.188-IN THK) |
| 4M1896 |
BUSHING (TERMINAL) |
| 0454065 |
SCREW 19.05 mm(.750 in.) long |
| 1256535 |
COVER (STARTING MOTOR) |
| 7T9123 |
GASKET (PLATE) |
| 3182082 |
SOLENOID AS-STARTING MOTOR (24-VOLT) |
| 1256536 |
TERMINAL ASSEM. |
